SEARCH

UPDATES

V-Techo

Tuesday, December 16, 2008

Serious Flaw Detected In IE


Users of Microsoft's Internet Explorer are being urged by experts to switch to a rival until a serious security flaw has been fixed.

The flaw in Microsoft's Internet Explorer could allow criminals to take control of people's computers and steal their passwords, internet experts say.

Microsoft urged people to be vigilant while it investigated and prepared an emergency patch to resolve it.
Internet Explorer is used by the vast majority of the world's computer users.

"Microsoft is continuing its investigation of public reports of attacks against a new vulnerability in Internet Explorer," said the firm in a security advisory alert about the flaw.
Microsoft says it has detected attacks against IE 7.0 but said the "underlying vulnerability" was present in all versions of the browser.
Other browsers, such as Firefox, Opera, Chrome, Safari, are not vulnerable to the flaw Microsoft has identified.
Browser bait
"In this case, hackers found the hole before Microsoft did," said Rick Ferguson, senior security advisor at Trend Micro. "This is never a good thing."
As many as 10,000 websites have been compromised since the vulnerability was discovered, he said.
"What we've seen from the exploit so far is it stealing game passwords, but it's inevitable that it will be adapted by criminals," he said. "It's just a question of modifying the payload the trojan installs."

"I cannot recommend people switch due to this one flaw," said John Curran, head of Microsoft UK's Windows group.
He added: "We're trying to get this resolved as soon as possible.
"At present, this exploit only seems to affect 0.02% of internet sites," said Mr Curran. "In terms of vulnerability, it only seems to be affecting IE7 users at the moment, but could well encompass other versions in time."
Richard Cox, chief information officer of anti-spam body The Spamhaus Project and an expert on privacy and cyber security, echoed Trend Micro's warning.
"It won't be long before someone reverse engineers this exploit for more fraudulent purposes. Trend Mico's advice [of switching to an alternative web browser] is very sensible," he said.

"The message needs to get out that this malicious code can be planted on any web site, so simple careful browsing isn't enough."
"It's a shame Microsoft have not been able to fix this more quickly, but letting people know about this flaw was the right thing to do. If you keep flaws like this quiet, people are put at risk without knowing it."
"Every browser is susceptible to vulnerabilities from time to time. It's fine to say 'don't use Internet Explorer' for now, but other browsers may well find themselves in a similar situation,"

Source:BBC NEWS


Read More......

Thursday, August 28, 2008

IBM mainframe Contest for students in Brazil


IBM is promoting a contest for students of mainframes in Brazil. Basically they have to sign up and perform certain tasks, some simple other complex that can take from weeks to months. The prizes ranging from T-shirts, PSPs and laptops to even working at IBM! 

Registration begins for students on August 27 and ends on 05 September 2008, or until all vacancies are filled. The competition, with access to the mainframe,will happen from September 08 until November 28, 2008. It is a good opportunity for students and teachers to know more than the mainframe environment as well as compete for prizes.

Read More......

FaceBook - The Movie


Is Aaron Sorkin getting his geek on?

The famous technophobe and Hollywood scribe is trading the "West Wing" and "Studio 60" corridors for the graffiti-scrawled, software-developer-mobbed corridors of social networking upstart Facebook Inc.

The Palo Alto company says it has not signed on to a Sorkin film about its inception, but Sorkin has started a Facebook group (well, he says, his assistant did that) to gather color for a Facebook film he is writing for Sony and producer Scott Rudin.

A Sony Pictures spokesman confirmed the project but wouldn't discuss details. Through a publicist, Sorkin declined to comment. 

Facebook spokeswoman Brandee Barker said: "We are routinely approached by writers and filmmakers interested in telling the Facebook story or the stories of the more than 100 million people who use Facebook to share and make the world more open and connected. At this point, we have not agreed to cooperate with any film project, but we are flattered by the interest."

The Facebook group (where Sorkin groupies have already congregated to write on Sorkin's wall) was first unearthed by the Defamer blog.

Sorkin's Facebook group page reads:

"Welcome. I'm Aaron Sorkin. I understand there are a few other people using Facebook pages under my name -- which I find more flattering than creepy -- but this is me. I don't know how I can prove that but feel free to test me.

"I've just agreed to write a movie for Sony and producer Scott Rudin about how Facebook was invented. I figured a good first step in my preparation would be finding out what Facebook is, so I've started this page. (Actually it was started by my researcher, Ian Reichbach, because my grandmother has more Internet savvy than I do and she's been dead for 33 years.)"

So what will a movie about the messy beginnings of Facebook be called? "A Few Good Founders"? Or "Face Off," complete with tense courtroom scenes from the legal battle over the company's creation?

(Note to Sorkin: Aaron Greenspan -- who attended Harvard with the founders, claims he came up with the idea for Facebook and recently penned a book on the subject -- would like to share his two cents).

And just who will they find to play Mark Zuckerberg, the official Facebook founder and chief executive?

Source: LA Times

Read More......

Monday, August 25, 2008

Make Partitions in Vista WITHOUT Disk Management

Windows Vista’s Disk Management tool can be quite deceiving. It allows you to work with partitions at ease in a presentable GUI format - but with problems. There have been a lot of complaints and confusion as to why Windows Vista grays out the extend volume and shrink volume properties. In response to this, I have found an alternative way to work with partitions, allowing you to easily resize, delete, and create partitions.
Diskpart.exe does a very good job at working with partitions. Unlike Disk Management, Diskpart actually works!

Before continuing, make sure that you:

  • Backed up all important files
  • Do not run diskpart.exe with Dynamic Disks
So here it goes....

1) First, you’ll want to pull out your Start Menu and type diskpart.exe
This will open a command-prompt like window. At this window, type list disk. This will list all your available hard disks.


2) Proceed by typing select disk < disk number > to select the disk you want to work with.

Creating a Partition or Volume:

At this point in time, you can create a partition. Type create and a set of new options will be presented to you. To proceed, just type create < new option>. (e.g. create volume)

What kind of partition should I create?
Primary: Primary partitions are limited to four per hard disk. If you are planning to install an operating system into a partition, you’ll want to choose primary since it is the only one that can be made bootable.

Extended: If you are planning to have more than four partitions, you’ll want to work with extended. An extended partition counts towards the limit of four, but you are then allowed to create logical volumes within these extended partitions. You’ll want to use extended partitions for backup or storage purposes only since they are not bootable.

3) Now we want to see which number is associated with the volume we want to work with. To obtain this list, type list volume


4) Select the desired volume by typing: select volume < number> or select partition < number>

You then have a list of options to choose from. Below is a list of commands you can type in depending on what you want to do with your selected volume. If you don’t input a number for size, the program will automatically use all the space available for your operation. For the purpose of this tutorial, I have decided to work with 10GB. (1000MB = 1GB)

  • Shrink desired=10000 minimum=2000 (Shrinks the volume by 10GB. If that’s not possible, this command makes sure that you at least shrink the volume by 2GB.)
  • Extend size=10000
  • Delete Partition
  • Format

Disk Management can be quite a nuisance since it decides to gray out certain properties on any given day. Please spread the word about diskpart.exe if you know someone who has had trouble working with partitions; as I am sure there are lots who are having similar problems.

Read More......

Friday, August 22, 2008

Free Virtual Desktops from Microsoft

The SysInternals department of Microsoft have today launched a new program "DESKTOPS" which help a user using many applications simultaneously.Desktops allows you to organize your applications on up to four virtual desktops.

Multitasking re-defined

Read email on one, browse the web on the second, and do work in your productivity software on the third, without the clutter of the windows you’re not using. After you configure hotkeys for switching desktops, you can create and switch desktops either by clicking on the tray icon to open a desktop preview and switching window, or by using the hotkeys.


The program is just 62kb in size and can be downloaded (or run as you wish) for free from the Microsoft website HERE.(It runs on even Vista!)

Read More......

CANON 50D SPECIFICATIONS [LEAKED]

Canon’s China website has published specifications for the 50D in its public webspace. Although the info is not on the front page of the site yet, it is accessible to anyone. Here is the link.
I’ve set forth the relevant translated specs and info below. Please note that the original specs listed here listed in-body IS as a feature. The translation was wrong and the feature has been removed from the spec list below. The specs referenced the advantages and compatibility with lens-based IS instead.

Here are the prominent features;

15.1 megapixel CMOS sensor
DIGIC 4
1.6x crop
Dust Reduction
Auto Brightness Processing
95% viewfinder .97 magnification
9 point af (All Cross Type)
35 meter area equipped with high-precision sensors
AF Fine Tuning
ISO 100-12800
6.3 fps (high speed) 3fps (low speed)
Buffer: 16 RAW - 60 JPG - 10 RAW+JPG
920,000 points VGA 3.0-inch LCD monitor
100,000 cycle shutter
Rugged magnesium alloy bodyFull Specifications

Canon 50D Full Specifications

General

Camera Type: Has a built-in flash AF / automatic exposure single-lens reflex digital cameras
Media Type: I or Type II CF card, UDMA compatible
Image Sensor Size: 22.3×14.9 mm
Compatible Lenses: Canon EF-series (including EF-S series lenses) (35 mm converted the focal length of the lens focal length is about 1.6 times)
Lens mount: Canon EF mount
Image Sensor

Type: CMOS Image Sensor
Effective Pixels: Approx.15.1 million pixels
Aspect ratio: 3:2
Dust removal function: Auto, Manual, add the dust data
Recording System

Recording format: Camera File System Design Rule 2.0
(Design rule for Camera File System 2.0) (Design rule for Camera File System 2.0)
Image types: JPEG, RAW (14 place Canon original); RAW + JPEG
Records of pixels: (4752 x 3168) Large: about 15.1 million pixels (4752 x 3168)
Medium: about 8 million pixels (3456 x 2304)
Small: about 3.7 million pixels (2352 x 1568)
RAW: about 15.1 million pixels (4752 x 3168)
sRAW1: about 7.1 million pixels (3267 x 2178)
sRAW2: about 3.8 million pixels (2376 x 1584)
Create / select: Folder Yes
Image Processing

Photo style: Standard, portrait, landscape, neutral, reliable setup, monochrome, User-defined 1-3
White Balance: Auto, the default (Daylight, Shade, Cloudy, Tungsten Lamp, White fluorescent light, flash), user-defined, Color temperature settings (2500-10000 K)
Noise Reduction: Can be applied to long time exposure and high ISO sensitivity shooting
Automatic image brightness correction: Automatic brightness optimization
High-priority tone: Yes
The amount of light surrounding the lens correction: Yes
Viewfinder

Type: Eye-level pentaprism
Rate outlook: Vertical / horizontal direction about 95 percent
Magnification: About 0.95 times (-1 m-1, using 50 mm lens on the infinite distance AF)
Focus: About 22 mm (eyepiece lens from the central -1 m-1)
Built-in diopter adjustment: -3.0 - +1.0 M-1 (dpt)
Focusing Screen: Ef-A equipped with the standard screen, and can replace the screen (2 sold separately)
Mirrors: Express back -
Depth of Field Preview: Yes
AF

Type: TTL auxiliary video coincidence, the phase detection
Automatic focus points: 9 (all cross-)
Metering range: EV -0.5 - 18 (23 ° C/73 ° F, ISO 100)
Focus modes: Single AF, AI Servo AF, Artificial Intelligence AF, manual focus (MF)
AF-assist light: By the built-in flash for a short flash
AF fine-tuning: AF can be fine-tuning
Exposure Control

Metering Mode: 35 Zone TTL full-aperture metering
Evaluation meter (with the focus of any automatic linkage)
Partial metering (the viewfinder about 9 percent of the area)
Spot (viewfinder central area of about 3.8%)
Central focus of the average metering
Metering range: EV 1-20 (23 ° C/73 ° F, the use of EF50mm f/1.4 USM lens, ISO 100)
Exposure Control: Programmed auto exposure (automatic, portrait, landscape, Macro, Sports, Night Portrait, Flash off, creativity automatic, procedures), shutter priority automatic exposure, aperture priority auto exposure, depth of field priority auto exposure, manual exposure
ISO Sensitivity: (Recommended exposure index)
Basic shooting zone mode: automatically set between ISO 100-1600
District creative shooting modes: ISO 100 - 3200 (in 1 / 3 increments), Auto, ISO sensitivity can be extended up to ISO 6400 or ISO 12800
Exposure compensation: Manual and automatic exposure bracketing (with manual exposure compensation can be used in combination) - Can be set numerical: ± 2 Stage 1 / 3 or 1 / 2 units to adjust
Auto exposure lock Auto: evaluation of the use of metering single AF mode - Manual: auto exposure lock button
Shutter

Type: Electronically controlled focal plane shutter
Shutter speed: 1 / 8000 second to 1 / 60 seconds (automatic mode), flash synchronization speed of 1 / 250 second 1 / 8000 to 30 seconds, B Mun (the shutter speed range. With the availability of various shooting modes. )
Flash

Built-in flash: Recoverable, auto-flash
Flash: 13/43 (ISO 100, to m / ft unit) flash coverage: 17 mm camera angle. Recycle time of about three seconds
External flash: X series of flash (camera can set up some flash function)
Flash Metering: E-TTL II automatic flash
Flash Exposure Compensation: ± 2 Stage 1 / 3 or 1 / 2 units to adjust
Flash Exposure lock: Yes
PC terminal: Yes
Driving System

Types: Single-shoot, high-speed shot, low shot funny (10 seconds or two seconds delay)
Continuous speed High-speed: Approx. 6.3 / sec. max
Low: the most about 3 / sec.
Continuous maximum number of (High-Speed Continuous):
JPEG large / distinctions: about 60 (90)
RAW: about 16 (16)
RAW + JPEG large / distinctions: about 10 (10)
* Based on these values to use 2 GB of memory cards, Canon testing standards (ISO 100 photos and standard style).
*Value in brackets apply to the testing standards based on Canon’s Ultra DMA (UDMA) 2GB memory card.
Live View Shooting

Focus: Fast mode (testing phase)
Real-time mode, real-time facial priority mode (contrast detection)
Manual focus (can be enlarged five times / 10 times)
Metering Mode: The use of image sensors to evaluate Spot
Metering range: EV 0 - 20 (23 ° C/73 ° F, the use of EF50mm f/1.4 USM lens, ISO 100)
Mute shooting: Yes
LCD Monitor

Type: TFT color liquid crystal display (there are seven brightness adjustment)
Monitor size and resolution: 3 inches, about 920,000 points (VGA)
Coverage: About 100%
Language: Interface 25 (with English)
Image playback

Image display format: Leaflets, pamphlets + information (image quality records, the shooting information, the histogram), four images index, nine image index, rotating images
Zoom: About 1.5 times - 10 times
View images method: Leaflets images, 10 or 100 images, screen, the date, Folder as a unit Jump
High-warning: Excessive exposure of the regional high-flicker
Direct Print

Compatible printer: PictBridge-compatible printers
Print Image: JPEG and RAW image
Print command: DPOF1.1 compatible version
Custom

25 Custom Functions
Camera user settings In the mode dial position of the C1 and C2 registered
Registration menu: Yes
Interface

Digital Video: For computer communications and direct printing (Hi-Speed USB)
Video output terminal: 3.5 mm mini-jack (optional NTSC / PAL)
HDMI mini OUT: terminal C -
Remote Terminal: And N3-compatible line of the shutter
Docking Systems terminal: WFT-E3 Used to connect wireless file transfer for WFT-E3
Power

Battery: Battery BP-511A (1)
* AC adapter can be packaged using the AC ACK-E2
* Installation of the battery box and handle BG-E2N or BG-E2, you can use on the 5th (AA/LR6) battery
Battery capacity shooting (Based on CIPA testing standards): 50 percent of the normal use of flash photography: 23 ° C/73 ° F at about 640. 0 ° C/32 ° F at about 540. 50% of the use of flash photography of real-time display: 23 ° C/73 ° F at about 170. 0 ° C/32 ° F at about 130.
Size and weight

Size (Width x x high-thick): 145.5×107.8×73.5 mm / 5.7 x4.2×2.9 inches
Weight: About 730 grams / 25.7 ounces (body only)
Operating Environment

Temperature range: 0 ° C-40 ° C/32 ° F-104 ° F
Working humidity range: 85 percent or less
Battery BP-511A

Type: Rechargeable lithium batteries
Rated voltage: 7.4 V DC
Battery capacity: 1390 mA
Size (Width x x high-thick): 38×21x55 mm / 1.5 x0.8×2.2 inches
Weight: About 82 grams / 2.9 ounces
Battery Charger: CB-5L
With battery BP-511A, BP-514, BP-511 or BP-512
The length of the power cord: About 1.8 m / 5.9 ft.
Charging time: About 100 minutes
Input Voltage: 100-240 V AC
Output voltage: 8.4 V DC
Temperature range: 0 ° C-40 ° C/32 ° F-104 ° F
Working humidity range: 85 percent or less
Size (Width x x high-thick): 91×67x32.3 mm / 3.6 x2.6×1.3 inches
Weight About 105 grams / 3.7 ounces (not including the power cord)

This information was translated from Chinese.So inadverent errors might have crept in.Sorry for the errors, if any.

SOURCE: PHOTOGRAPHYBAY

Read More......

Thursday, August 21, 2008

Mac Bundle Box - Special Offer

Apple Mac users have been frequently offered applications at special price.Here too you have a chance to buy Mac Bundle Box comprising 15 applications at $346.69  $49.95 only.
The available applications are;

1)Headline - a reader of feeds with minimal extreme aspect.

2)Mac Pilot 3 - system optimizer

3)iConquer - a strategy game.

4)Mahjong Forests - a Chinese traditional game.

5)Shoebox Express - an organiser of photograph according to subjects.

6)Caboodle - Lean, clean, snippet machine to store information on your Mac

7)Narrator - reader of text in multiple voices.

8)WriteRoom - a text publisher that promises concentration only in the text.

9)Scribbles - a simple tool of drawing.

10)Money - Form to organise the domestic finances.

11)Operation - Publisher of projects.

12)Dawn - a alarm-clock that itself co-ordinates with iTunes.

13)Composer - an image publisher.

14)Sofa Control - to control many applications through apple remote.

Read More......

Yes-its an iPhone with a Telescope

So, we have been tracking the iPhone features for quite some time now.We also reported how Mr.Steve Jobs acknowledged the apps crash on the iPhone.Let's now focus our attention to some extra gadgets which can be used on the iPhone.

Have your ever wondered if you could use your multi-utility iPhone even as a telescope?If not, then we'll tell you - "YOU CAN".

One of the most critical feature of the iPhone is its 2 mega pixel camera.You might have wished that Apple could have done a lot better in the camera.But wait, did you know that you can.This add-on telescope for the Apple iPhone won’t make your mobile phone look very good, but it will give you 6x zoom capabilities.
Usage 
  • Change the cellphone back shell first enclosed with the telescope.
  • Adjust the clear foucs with the naked eye.
  • It can take a picture while fixing the telescope on back shell. (If the screen of your cellphone is analyzed degree enough, you can adjust the focus with the screen of the cellphone).
The Apple iPhone Mobile Phone Telescope ($19) is available from Brando.

Read More......

Microsoft Photosynth - A 3D Experience


First there was the snapshot, and then came video. Now there is Photosynth,
On Wednesday night, Photosynth, a technology demo from Microsoft Live Labs, is graduating from its "ooh, that's pretty" status to being a viable Web service for consumers.

The technology, which takes a grouping of photographs and stitches them into a faux 3D environment, can now be implemented with photos you've taken on your digital camera or mobile phone, and converted right on your computer. Previously, the process of stitching these photos together took weeks of processing on specially configured server arrays. With its latest version, Microsoft has managed to shrink that into around the time it takes to upload your photos.


Microsoft is giving users 20GB of online storage for their Photosynth collections. Photosynth product manager Joshua Edwards tells me this can easily fit 60 or more "synths" made up of around 150 to 200 photographs apiece--the higher end of what's recommended for what Edwards calls an optimum or "synthy" experience. Users who are making really neat collections will be granted additional space.

One of the most impressive parts of Photosynth is how damn fast it is. Over a decent broadband connection you'll immediately see large thumbnails that quickly begin to sharpen as data fills in the missing pixels. You can continue to zoom into these areas and they'll sharpen up even more on some of the super high-resolution shots.

The streaming and rendering technology behind Photosynth is Seadragon, another project from the Microsoft Live Labs universe. Users have always had to download a special Seadragon-based plug-in to view other people's synths. The new twist with the latest plug-in now comes with a desktop uploader that can be used to add your own collection to the Photosynth universe. This runs with complete autonomy from your browser, so you don't have to worry about it stopping if you close out your browser. It also works in both IE 7 and Firefox 3, making it cross-platform--at least for Microsoft. If you're a Mac user looking to get your hands on some Photosynth action you'll have to keep waiting. The focus on Photosynth will remain on the PC for the time being.

So,this could be "Sweet" or "Sour" depending on the Operating System you use, because this works only on WINDOWS!

Read More......

Wednesday, August 20, 2008

Intel's new Dual-core Atom chip


Intel at its Developer Forum is quietly providing new details of its widely reported dual-core Atom processor. Although not providing all formal details itself, the company is expected to launch an Atom 330 with twin cores at 1.6GHz and will be built on a 45 nanometer process that reduces the amount of power use despite the additional core. The chip should remain on the same 533MHz system bus.

Other details of the processor itself are still unknown, though past leaks have pointed to a continued use of Hyperthreading that would let each core handle as many as two code threads at one time and create up to four effective cores with optimized apps. A doubled Level 2 cache of 1MB should also help improve performance.

The semiconductor firm has already confirmed that its initial implementation will include at least a desktop version for nettops and other very low-power, budget systems. A new mainboard, the D945GCLF2, will fit into any mini-ITX case and will include both GMA 950 integrated graphics as well as support for up to 2GB of memory in a single slot, gigabit Ethernet, as well as equal pairs of Parallel and Serial ATA connections for storage.

A launchpad for the new mainboard is sheduled for September.

SOURCE: Electronista

Read More......

Steve Jobs acknowledges iPhone app crash


iPhone owners suddenly locked out of their third-party apps by a crash bug on startup will have a solution only in September, Apple chief Steve Jobs has revealed.

Steve job has published a characteristically brief and rare personal responses, assuring the iPhone users that his company is aware of the problem and has a solution.

"This is a known iPhone bug that is being fixed in the next software update in September," reads the one-line message from the Apple co-founder.


Many report the iPhone 2.0 firmware suddenly failing to load non-default apps regardless of their nature, briefly loading them before abruptly jumping back to the home screen.

The bug occurs both with freshly downloaded software and with updates, but is reported as never having a definite fix; although some report successfully deleting and re-downloading apps to regain access, others find the solution either having no effect or gradually decaying over time to where the apps again fail to run. Restoring the iPhone also seldom works.

Even if the root cause has been identified, however, the weeks-long wait has been cold comfort for those affected by the crashes, many of whom had updated their original iPhones just to add support for third-party programs.

So, lets just wait and watch the iPhone.I do think that its following the same path as that of Vista (great hype before launch and no need to explain thereafter!)

Read More......

Saturday, August 16, 2008

Vista and Mac Leopard-Dual Boot


OK.So you do admit that Vista is not what you need with all the negative comments and the security issues around it and within inside you feel that you want a MAC.But you have just spent a couple of grand on your new (or a year or so old) PC.So, what are you going to do now? Well, in this tutorial I show you how to DUAL BOOT Mac OS Leopard on your Vista installed Intel (and also AMD) computer.Follow the instructions very carefully and feel free to post any doubts or suggestions you need.

DISCLAIMER:This Guide is for educational purposes only and it is highly recommended you buy yourself an original Mac. Also please do not post links to the Torrents as they will be removed.



Well before we proceed with the guide, here is the stuff that you will need for a successful dual boot setup.




  • Vista Already installed on your Primary Hard Disk.

  • iATKOS v1.0 DVD. (Do not ask me where you can download this)

  • Windows Vista Boot DVD (Just incase something goes wrong)


Well now that you have everything ready, lets get started then. Please note this is going to take sometime so I suggest you have some Music playing near by and grab yourself a cup of coffee while you do this. Sit tight, here we go……….



  • Install Vista on the First Partition of your Hard Disk. I am not going to elaborate into How to install Windows, I hope everyone knows it. If you already have it installed then read on..


  • Right click on My Computer and Click on Manage. Select Disk Management. Now Create a new Volume for OSX by shrinking an existing volume. You need atleast 5GB of space and the new volume should show up as Unallocated.

  • Make sure that the partition shows up as Unallocated, else repeat the previous step.

  • Now restart the machine and boot into the Leopard DVD that you burned using the iATKOS v1.0 DVD Image.

  • Press F8 as the countdown begins and type -v at the prompt and hit enter.


  • You should see scrolling text on the screen now. If it stops anywhere then drop a comment and I’ll try to help you out.

  • After a while you should be looking at the Leopard Installer. Follow the instructions on Screen.

  • Once the Loading Bar vanishes Select Utilities -> Disk Utility .

  • Select the Volume you created previously and format it as MAC OSX Journaled Extended. Once the formatting is done the volume is ready for installation.

  • Now Close Disk Utility and Select Utilities -> Darwin Boot. Type Y at the prompt.


  • At the prompt when it asks for the Disk Number enter 0. For the Partition Number if your Leopard Partition is 2nd on the disk, then enter 2 and so on.

  • Accept the following prompts and you should see a success prompt saying that so many block of data were written successfully.

  • Now get back to the Leopard Install Screen. Choose the partition that you made in the beginning and follow the instructions on screen.

    Please don’t select any patches etc during the installation, this is normally the reason for most failed installations. Just the plain install would do.

  • Once the Install is done, reboot with the DVD in the drive. Press F8 at Darwin Boot Loader and type -s and press enter.

  • Execute the following commands :

    fdisk -e /dev/rdisk0

    flag 1


    quit

    reboot

  • Now before the PC restarts remove the DVD. At this point you should be able to boot into Vista normally.

    Note: If you are unable to log into windows, because there is an error which says “winload.exe” correupted.! Relax. Just insert the Windows VISTA boot DVD into the drive and restart. Click on “Repair computer” once you are inside the DVD and it will automatically detect if a problem exists and suggest “Repair and Restart”. Press the same, and remove the DVD once the PC is about to restart. You should now be able to log in to vista without any problem.

  • Now that we have almost everything running fine, lets proceed with the dual boot setup.

  • Boot into Vista. Copy the chain0 file from the Leopard DVD to C:

  • Open the “Command prompt” with “Elevated Admin” privileges from the Start Menu.

  • Type the following into the prompt

    bcdedit /copy {current} /d “Mac OS X”


    bcdedit /enum active

    bcdedit /set {GUID} PATH \chain0


    In the first command type {current} as it is, literally..nothing else..just {current} with the brackets. In the 3rd command however, replace the {GUID} with the alphanumeric GUID you see in the enumerated list under MAC OS X. You can see this list on your terminal as soon as you type the 2nd command above.

  • Close the Command Prompt and Restart Vista.

  • You Should now be looking at a screen with two options to boot into Mac OSX or Vista.

  • Select Mac OSX to see if you can boot into it. You should see the familiar Darwin boot Loading screen with the timer going down. If you dont do anything, then it counts to zero and again shows the menu screen with Vista and MAC OSX options. Dont panic!

    Again select MAC OS X, and now as the timer counts down, Press F8. You would see a list of partitions on your disk with their names. Select the partition with MAC OSX installed by using up/down arrows and press ENTER.

  • Voila!! your Mac should be booting up as you read this..



See it was that simple. No more HFS+ and Blinking Cursor errors. Just follow this guide step by step and you should be able to dual boot Windows Vista and Leopard in no time. If you have any questions just drop in a comment, I’ll reply at the earliest.


For Drivers and Patches I suggest you look at the InsanelyMac Forums. This guide would have been nearly impossible without :



  • Uphuck Forums

  • InsanelyMac Forums

  • OSX86 Wiki.


If you are looking to Install Leopard on an AMD based machine follow the instructions here to patch your iATKOS v1.0 Image. Special Thanks to I Am Nihilist






Read More......

Thursday, August 14, 2008

Dell releases 19 hours Laptop

Recently, Dell launched a new laptop, the Dell Latitude E6400 which has a whopping battery capacity of 19 hours. This Latitude laptop is equipped with two batteries which along with the latest technology and software provides 19 hours of battery life




The company's Latitude E6400 runs for as much as 10 hours on a single nine-cell battery, and an additional battery that snaps on to the bottom of the laptop adds as much as nine hours of battery life, Dell officials said at a press event in San Francisco. That gives users close to a full day of laptop use without carrying an AC adapter to recharge the batteries.

The Latitude E6400 comes with a 14.1-inch screen and runs an Intel Core 2 Duo processor. It can have as much as 8G bytes of RAM and 250G bytes of storage. The system comes preloaded with Windows Vista, with an option to downgrade to Windows XP. It is priced starting at US$1,139. The Latitude E6500, a similar laptop with a larger screen, was also announced, starting at $1,169. Both systems are available immediately.

Read More......

Windows apps on Linux the CrossOver way




Who says you have to give up your must-have Windows applications when you migrate to Linux? If you can't leave some crucial Windows program behind, you can run it using CodeWeavers' latest version of CrossOver Linux.



Though today there are many great Linux end-user applications, some people still have "must-have" Windows applications -- Quicken instead of GnuCash, for instance, or Photoshop instead of the GIMP. That's where CrossOver Linux 7 comes in.



With this new version, you can run more Windows programs on Linux than ever. Such popular Windows programs as Microsoft Office -- from 97 to 2007 -- Internet Explorer 6, and Quicken run almost as well on Linux as they do on Windows. Other programs, like Adobe Photoshop CS3, run decently albeit not perfectly on Linux with CrossOver.




CrossOver is based on the open source project Wine, an implementation of the Windows API on top of the Unix/Linux operating system family. Wine is a very mature project, which, after 15 years of development, has reached the 1.0 mark.



You don't need CrossOver Linux to run Windows applications on Linux. Wine alone is enough. Wine, however, requires more technical expertise to use properly. What CrossOver gives you is an automated Windows application installation and technical support. For most users, who just want to run their Windows programs and not bother with the nuts and bolts of Wine, CrossOver Linux, which retails for $40, is worth the money. CodeWeavers also offers CrossOver Mac, which brings the same functionality to Intel-powered Macs.



To see how well this Wine 1.0-powered edition of CrossOver Linux works I tested it on two systems. The first was my main openSUSE 11 desktop, a Hewlett-Packard Pavilion A6040N Desktop PC powered by a 1.86GHz Intel Core 2 Duo E6320 dual-core processor with 2GB of 533MHz RAM and a 320GB SATA (Serial ATA) hard drive running at 7200 RPM. It's a good 2007-era PC.



I also put CrossOver 7 through its paces on an older Gateway 503GR running Ubuntu 8.04. It comes with a 3GHz Pentium 4 CPU, 2GB of RAM, an ATI Radeon 250 graphics card, and a 300GB SATA drive. Both systems had more than enough raw horsepower power to run Linux, CrossOver Linux, and multiple Windows and Linux applications simultaneously.



CrossOver requires very little from a system. CodeWeavers claims that any 32-bit system that runs at 200MHz can run CrossOver. The program will run on 64-bit systems, but only if they have the 32-bit compatibility library installed. CrossOver also requires that your Linux includes Glibc 2.3.x or greater and X11R6 3.3 or greater. XFree86 4 with XRender and FreeType support is recommended. The bottom line is any modern Linux can run CrossOver.



The program can be installed in several different ways. The sure-fire way of installing it on any Linux is to use its shell script. Once you have it installed, CrossOver presents you with a GUI that works equally well with both KDE and GNOME. Here, you choose which Windows applications you want to install from a supplied list of supported applications.



Installing Windows applications is a snap. It's a pick and clip operation. You can also install non-supported applications. Some, such as my favorite HTML editor, NoteTab, even though not technically supported, will run, albeit with some problems.



You should also keep in mind that, while CodeWeavers is trying to support the most popular Windows applications on Linux, it doesn't support every program. Check the company's compatibility pages to see if anyone has tried to run your particular favorite program with CrossOver and how well it has gone for them.



Once in place, the supported Windows applications ran without a hitch. I spent most of my time working on Word 2003 documents, Excel 2003 spreadsheets, IE 6, and fairly complicated Quicken 2006 financial statements. The programs ran well. As a matter of fact they ran better on Linux than they did on Vista. Quicken, in particular, took better to CrossOver than it did to Vista. With a little research I found out that this was not just me. Vista is known to have trouble with several versions of Quicken.



Some Windows software runs better on Linux than it does on the latest version of Windows -- who knew?



CrossOver isn't perfect of course. While I was able to run Photoshop CS3, I sometimes had trouble rendering the CS3 interface. A screen refresh usually took care of the problem, but some users will doubtlessly find that annoying.



I would also sometimes need to force a screen refresh when one Windows application's window covered up another. When I'd reveal the "lower" application, the part of it that had been covered by the other Windows application wouldn't render properly. After doing anything with the new foreground application, such as running a command, the foreground program's screen reappeared as it should.



CodeWeavers also offers CrossOver Linux Professional, which costs $70, can be used for multiple users, and comes with CrossOver Games. This addition includes advanced support for DirectX, Microsoft's graphics application programming interfaces for games. With this, many Windows games will run well on Linux. I can personally attest that zapping your enemies and other baddies in World of Warcraft and Guild Wars is just as much fun on Linux as it on Windows. CrossOver Games is also available separately for $40.



Not sure if CrossOver is right for you? You can download a free 30-day trial version of CrossOver Linux and a seven-day trial edition of CrossOver Games. You should find that more than enough time to see if these programs deliver the Windows goods for you.

SOURCE: Linux



Read More......

Install Windows XP on Your Pre-Installed Windows Vista Computer


The question I am asked most often is "How do I install a dual-boot with Windows XP on my new Windows Vista computer?" The answer is that it's not that difficult, it's just very time consuming, and you need to own a copy of Windows XP.



Note that you should not attempt this if you aren't ready to troubleshoot any problems that might occur.



The first issue we encounter is that computers with pre-installed operating systems take up the entire drive. Luckily Microsoft included the Shrink volume feature in Vista, so we can easily shrink the Vista partition down to make room for XP.



Open the Computer Management panel, which you can find under Administrative tools or by right-clicking the Computer item in the start menu and choosing Manage. Find the Disk Management item in the list and select that.





image



Now we'll shrink our volume down by right-clicking on the main hard drive and choosing Shrink Volume.



image



Now you can choose the size that you want to shrink, which really means you are choosing the size that you want your XP partition to be. Whatever you do, don't just use the default. I chose roughly 10gb by entering 10000 into the amount.



image



The next step might be confusing, because we need to change the cd-rom drive that's invariably taking up D: at the moment, because we want to use D: for the Windows XP partition, but it's already taken by the cd-rom drive. If you skip this step than XP will install onto the E: drive, which isn't the end of the world, but it's not quite as tidy.



Right-click on the cd-rom drive in the list and choose Change Drive Letter and Paths from the menu.



image



Now we'll change the CD drive to use E: by selecting that in the drop-down.



image



Now we can create a new partition for XP to live on and make sure that the drive letter is set the way we want. If you do not create a partition now the XP install will do so automatically, but it's easier and cleaner to do it this way.



Right-click on the Unallocated free space area and then select New Simple Volume from the menu.



image



Follow through the wizard and select whatever options you'd like, making sure to use D: as the drive letter.



Now you will need to close out of disk management and reboot your computer. This is because we can't do the next step until we reboot. (you can try, but it won't work)



So we've come back from rebooting… open up Computer from the start menu and then right-click on the D: drive and select properties. Give your partition a meaningful name like "XP". It would be wise to name the C: drive to "Vista" at this point as well.



image



Now you'll want to pop your XP cd into the drive and boot off it. You may have to configure your BIOS to enable booting off the CD drive, or if your computer says something like "Hit Esc for boot menu" you might want to use that.



Once you come to the screen where you can choose the partition to install on, then choose either the unpartitioned space or the new partition you created. Whatever you do, don't try and install onto your Vista partition! See how much cleaner it is now that we've labeled each partition distinctly?



image



We'll assume XP is completely installed at this point, and you will have lost your ability to boot into Windows Vista, so we'll need to use the VistaBootPro utility to restore the Vista boot loader.



Download and install VistaBootPro from vistabootpro.org



During the install you'll be forced to install the .NET 2.0 framework. Open up VistaBootPRO and then click on the System Bootloader tab. Check the "Windows Vista Bootloader" and then "All Drives" radio buttons, and then click on the Install Bootloader button.



image



At this point, the Windows Vista bootloader is installed and you'll only be able to boot into Vista, but we'll fix that. Instead of manually doing the work, we'll just click the Diagnostics menu item and then choose Run Diagnostics from the menu.



image



This will scan your computer and then automatically fill in the XP version.. click on the "Manage OS Entries" tab and then click in the textbox for Rename OS Entry, and name it something useful like "Windows XP" or "The Windows That Works"



image



Click the Apply Updates button and then reboot your computer… you should see your shiny new boot manager with both operating systems in the list!



image



If you get an error saying "unable to find ntldr" when trying to boot XP, you'll need to do the following:





  • Find the hidden files ntldr and ntdetect.com in the root of your Vista drive and copy them to the root of your XP drive.


  • If you can't find the files there, you can find them in the \i386\ folder on your XP install cd



There's more information on this forum thread, thanks to nrv1013



This is a critical piece of information: Windows XP will be installed on the D: drive, even in Windows XP… so you'll need to keep that in mind when tweaking your system.



image



You can share information between the drives, but I wouldn't recommend messing with the other operating system's partition too much… it might get angry and bite you. Or screw up your files. What I do recommend is that you store most of your files on a third drive shared between the operating systems… you could call that partition "Data".



I'm going to write a number of followup articles dealing with all of the issues with dual-boot systems, so subscribe to the feed for updates.



SOURCE: HowToGeek



Read More......

Friday, August 8, 2008

Killer Development tool from Linux Foundation


Ask any independent software vendor what he hates most about developing for Linux and he'll tell you that it's having to develop for SUSE and for Red Hat and for Ubuntu and ... you get the idea. The Linux Foundation has just released a beta of a new program, Linux Application Checker (AppChecker), that's going to make ISVs and other programmers start to love developing for Linux.

AppChecker, now in beta 3, is a downloadable open source Linux program. Once installed, the program shows you a Web page, the LSB Database Navigator. Here, you click on the Application Check link. This presents you with a Web form interface to fill out. In this form, you'll enter a name for your report and Name field, and in the Components field you'll enter the file path for your application. Next, enter the application's individual files, directories, installed RPM packages (prepended with pkg:),; RPM and .deb package files, and tar.gz and tar.bz2 archives. To make this manageable, click on the Select Application Components button so you can enter each item in a separate field. Next, select the LSB Version and LSB Profile you want to test against.


You then let AppChecker rip. It will automatically decompress archives and start testing. The program will check out your ELF (Executable and Linking Format, a.k.a. binary files), Perl, Python, and shell scripts. So far, this doesn't sound much more than just another fancied-up version of the forerunner of all program checkers, lint, but it's what AppChecker does next that will make it a must for any Linux software developer.




AppChecker then checks your program not only against different versions of the Linux Standard Base (LSB), but also against all the Linux distributions in the LSB Database. After the test is done it will present you with a report. It's this report that makes AppChecker special.




In the Web-based report, you're shown the compatibility status of your application with the various distributions, and which external libraries and interfaces your program uses. If all goes well, it gives you the option of putting your program in for LSB certification straight from the test program. It doesn't just give you a thumbs-up or thumbs-down for your application on any particular distribution, according to Amanda McPherson, Linux Foundation vice president of marketing and developer programs -- it "gives you the details you need to get your program running on a particular distribution."




McPherson warns, "This is a beta program and there's no guarantee, but yes, if AppChecker says your program should work with, say, Ubuntu 7.10 and 8.04, then your application should work on these distributions. The results can get very granular. It will tell you this library or this interface isn't available in this distribution. It can also recommend some replacements. For example, OpenSSL is often a problem and you should use different SSL library."




The program's initial idea came from McPherson and Ted T'so, the Linux Foundation's CTO and noted Linux kernel developer. AppChecker was then put together by T'so and the Russian Academy of Science. The program is licensed under the GPLv2.




According to AppChecker's technical documentation, AppChecker works by analyzing your "program's C/C++ symbols -- mostly functions with some global variables -- and libraries required by an application that are satisfied by dynamically linked libraries provided by a distribution."




AppChecker isn't a debugger. It doesn't check that the "type information expected by the application matches the type of the object provided by the distribution's libraries. For example, the layout of a data structure might have changed, or the function parameter that had previously been a 32-bit integer may have been changed to a 64-bit integer. Another problem that cannot be detected by the AppChecker is if the details of a function's behavior changes from one version to another."




What it does do is spell out for you what libraries and interfaces are provided by any given distribution, and make suggestions on which ones you might use as replacements to work on a particular version of Linux, or that will work on several different Linux distributions, McPherson explains. With this tool, you can quickly see what you need to do with your application to make it more portable across different Linux distributions.




It isn't perfect, of course. Not only is the program still in beta, but some libraries and interfaces aren't in the LSB databases. Still, it's a huge step forward in enabling developers to see exactly what they're dealing with in writing an application for multiple different versions of Linux.




AppChecker users can keep their test results to themselves, but McPherson hopes that they'll share their results with the Linux Foundation. "If you choose choose to share your results with us, it helps the Linux platform and helps the LSB get better. For example, it tells us what libraries Linux developers are using that aren't in LSB. We can then include [them] in the LSB, and that will make the LSB better."



SOURCE: LINUX


Author: Steven J. Vaughan-Nichols

Read More......

Friday, August 1, 2008

NOKIA N96 Complete Info



Description

The one to watch.
5 mega-pixel camera, digitial TV, DVD video capture and 16GB memory, for a true multimedia experience.



Nokia N96 - Key Features:

Network Quad Band GSM 850/900/1800/1900
3G Yes (900/2100 HSDPA)
Memory
16GB
Memory Slot microSDHC
Wi-Fi
Yes (IEEE.802.11b/g)
Bluetooth Yes (stereo)
Camera Yes (5 mega-pixel)
Size 103 x 55 x 18 mm
Weight 125g
Battery (BL-5F)
Talk Time: 220 mins; Standby Time: 220 hrs

Camera:
Explore and capture the world around you. Built in GPS works in conjunction with the 5 mega-pixel camera to automatically geotag your photographs. Store not only the date/time but the location for each photograph automatically and seamlessly. Auto-focus, Carl Zeiss optics and a high intensity dual LED flash combine to create photographs with exceptional clarity.

Video Player:
Immerse yourself in entertainment. The brilliant 2.8" high resolution display lets you view your videos and photographs in stunning detail. 16GB of on board storage allows you to take your collection of high-definition movies with you.

Video Record:
>Experience DVD quality video capture. Record video at high resolution VGA (640 x 480 pixels) and at a smooth 30 frames per second. Digital video stabilization ensures smooth steady video capture reducing unwanted shake whilst the video photo light allows night time recording. Built in TV out option allows you to connect your Nokia N96 directly to a TV for watching your movies on the big screen.

TV:
Watch TV without a TV. DVB-H support brings digital TV directly to your Nokia N96. Where available, DVB-H brings your favourite TV's shows and channels to watch on the go.

Music Player:
Take your music with you. Built in 16GB of storage and expandable memory lets you carry over 6000 songs in your pocket. Hear a song you like? Download and buy songs instantly on your Nokia N96. Stereo FM radio lets you listen to your favourite music stations and talk shows.

Navigation:
Find new places around you. Assisted GPS (AGPS) technology and Nokia Maps provides free downloadable maps and satellite imagery for over 150 countries around the world. Find your way whether your driving or walking on foot. Location based services lets you find cash machines, shops, restaurants, bars and useful locations near you automatically when you need them.

Internet: Carry the internet in your hand. Nokia Web Browser with Mini Map technology displays complete websites. Support for HTML, Java script & Flash bring a rich multimedia internet directly onto your phone.


Technical Details


Dimensions:
- 103 x 55 x 18 mm
- Weight: 125g
Display: 240 x 320 pixels (2.8 inch)
Network:
- GSM: 850/900/1800/1900 (Quad-Band)
- WCMDA: 900/2100 (Dual-Band)
Camera:
- 5 mega-pixels
- Digital Zoom
- Dual LED Flash
Music:
- Supported formats: MP3, AAC, eAAC+ & WMA.
- FM Stereo Radio (RDS)
- Nokia Internet Radio
- Nokia Music Store
Video:
- Hi-Resolution VGA Video Recording
- 30fps Video Recording
- Supported formats: MP4, 3GPP, H.264 & Real Player
- Video Streaming
Ringtones:
- Monophonic
- Polyphonic (64)
- MP3
- AAC
Messaging:
- SMS
- MMS (with video)
- E-mail (POP3, SMTP, IMAP4)
Memory:
- Phone Book (Unlimited)
- Dialed Calls (30 Days)
- Missed Calls (30 Days)
- Received Calls (30 Days)
- 16GB (internal)
- microSDHC (external)
Call Features:
- Hands Free
- Caller ID
- Voice Dialing
- Push to Talk (PTT)
Connectivity:
- microUSB
- Nokia 3.5mm AV connector
- Bluetooth (2.0)
- Wi-Fi (IEEE 802.11g)
- GPRS Class 32
- HSDPA (3.6 Mbits)
Navigation:
- AGPS
- Nokia Maps
Features:
- DVB-H Digital TV Receiver
- TV Out
- Office Document Viewer (Word, Excel)
- PDF Document Viewer

Read More......

Tuesday, July 15, 2008

Funny Google Search Results

GOOGLE, Who hasn't heard of it? You might use it daily for a whole bunch of information.But do you know the funny side of this? Try searching some Queries and Google gives you very "FUNNY" results. Here are some of the very famous examples:

Who is a failure?
Just type in ” who is a failure ? ” in the Google search box and hit enter. And the first result is…well..see it for yourself.



Search

If you type the word search in the Google search box and hit enter, the weird thing is that Google itself shows up somewhere down at 8th place.BTW, the first result is AltaVista!!!



Achieving

This one is really hilarious and probably the most desired one too. Type the word Achieving in Google search box and see the first result. LOL !



What to do if inside of the grill gets wet

Ask Google what to do if inside of the grill goes wet. Well, I think Google is pretty good at assuming things too…accurate!



Find Chuck Norris

So you wanna find Chuck Norris, huh ? Type it in Google and click on I’m feeling lucky, and then see what it has to say ( It’s actually a site created probably by a Chuck fan. Neat idea ! )




But here comes the BEST!
Do a google search for....

US President George.W.Bush a Big Winner
Needs no explaination!



Read More......

Monday, July 14, 2008

Yahoo shares fall sharply


 Yahoo Inc. shares fell Monday after the struggling Internet icon revealed that it rejected Microsoft Corp.’s latest purchase offer, made with activist investor Carl Icahn.

The stock shed $1.13, or 4.8 percent, to $22.43 in afternoon trading. In the past year, the stock has traded between $18.58 and $34.08.



On Saturday evening, Yahoo rejected a sweetened Microsoft-Icahn offer made Friday. Icahn, who has no experience running an Internet company, would have been left in charge of Yahoo’s remaining pieces had an agreement to sell the search engine to Microsoft been reached.

Yahoo shares gained 10 percent last week on hopes that Microsoft’s decision to side with Icahn might pave the way for a deal.



Four reasons why Yahoo! shook its head 

1. Yahoo!'s existing business plus its recently signed commercial agreement with Google has superior financial value and less complexity and risk than the Microsoft/Icahn proposal.

2. The Microsoft/Icahn proposal would preclude a potential sale of all of Yahoo! for a full and fair price, including a control premium

3. The major component of the overall value per share asserted by Microsoft/Icahn would be in Yahoo!'s remaining non-search businesses which would be overseen by Mr. Icahn's slate of directors, which has virtually no working knowledge of Yahoo!'s businesses.

4. The Microsoft/Icahn proposal would require the immediate replacement of the current Board and removal of the top management team at Yahoo!. The Yahoo! Board believes these moves would destabilize Yahoo! for the up to … one year it would take to gain regulatory approval for this deal.



Read More......

Friday, July 11, 2008

Major Internet Flaw discovered

U.S. security experts have discovered a major flaw in the design of the Internet's address system that affects virtually every corporate computer network. 

The flaw in the Domain Name System could allow hackers to steer most people using corporate networks to malicious Web sites, The Los Angeles Times reported Wednesday.

So far, hackers haven't taken advantage of the flaw, and the security experts say every major software company affected is in the process of issuing patches to fix the problem.

The man who discovered the flaw, Dan Kaminsky of the Seattle-based security firm IOActive Inc., says he hopes the patches will be broad enough that hackers won't be able to reverse-engineer them.

"We got lucky in this particular bug, because it's a design flaw," says Kaminsky. "It shows up in everyone's network, but the fix is a design fix that doesn't point directly at what we're improving."

Kaminsky says it took only a couple of hours to find the flaw but fixing it will take several months.


PRECAUTIONS:
-Make sure you keep all Internal DNS requests internal, block them at the firewall and use a DNS proxy/"external"DNS server to make requests on their behalf.
-There is little need to use recursion within the Internal network.
-if using 2003 server from microsoft, set up all Internal DNS servers as "secondaries"
-remove the DNS Root servers from your internal/secondary DNS server so they can not send requests out the firewall/dns proxy server. replace them with your last-"external" DNS server.
-point all internal DNS servers to the "external" DNS proxy server or DNS server instead of the root name servers.
-avoid using forwarders that point to external DNS servers like your ISP's or the root DNS servers. Force the DNS clients and Internal DNS servers to make the request by forwarding directly to the DNS proxy or DNS server that is the "external" or last hop out.
-set up DHCP so that client computers use the appropriate Internal DNS server for their network/subnet.

Read More......

Thursday, July 10, 2008

Apple iPhone 3G-Complete Guide



The new iPhone 3G debuts this Friday and the anticipation is building for the latest device from Apple. It is expected that long lines will form outside the Apple stores for the new iPhone 3G just as they did at the introduction of its predecessor the original iPhone.

The original Apple iPhone was a love it or hate it device - and incredibly slick and stylish handset, but one with a number of serious flaws. The replacement iPhone has been rumoured for months and finally we can see what Apple have kept very secret - the new Apple iPhone 3G. Billed as "Twice as fast. Half the price", the iPhone certainly addresses two of the key concerns of the original - that it was expensive and slow.


iPhone 3G Benefits

iPhone 3G will retain the look and feel of the original model but will sport a much more attractive price tag of $199, half of what the original iPhone cost. This iPhone 3G uses a new cellular technology that is extremely fast over the cell network called 3G. It also has a new operating system that will allow for wireless synchronization with your email and calendars.

Apple has improved the audio on the new iPhone and the speaker is much louder for both music and for the speakerphone. But the camera on the iPhone 3G is still not impressive, with just a resolution of 2 mega pixels and it still can't record video. For U.S. users the power adapter is now tiny and there is no longer a dock for charging, just a cable.

Apple is introducing a consumer service called Mobile Me for the new IPhone 3G and for upgraded older models. MobileMe offers functionality such as synchronized push email, calendars, photo and contact management.

There are other improvements on the new iPhone 3G such as the ability to delete multiple emails at once, set parental controls, search contacts, save photos in emails and open Microsoft PowerPoint files sent as attachments.

iPhone 3G Hidden Costs

The new iPhone 3G has two hidden costs that have surfaced in testing of the phone. The first cost being that the iPhone's 3G battery drains much faster than the battery did on the original iPhone. Because of the demands of the 3G network, the new iPhone 3G requires a lot more power for the same functions. This problem becomes quite significant because the new iPhone 3G has a sealed battery that can't be replaced with a spare, it has to be charged.

While the Apple iPhone 3G is certainly a much better device than the original iPhone, a lot of flaws still exist. Many of Apple's competitors will be breathing a sigh of relief that the iPhone 3G is certainly not as good as it should be. Still, we think that it will sell well and even the hardest of cynics were impressed by the original iPhone when they get their hands on one.


Source: AssociatedContent and MobileGazette

Read More......

Monday, July 7, 2008

Future Technology from Japan






You've just seen something that will replace your PC in the near future. This is not a pen with cameras. They are the revolution makers of IT Industry.

Ladies and gentlemen... 


CONGRATULATIONS!!!

You've just looked into the future... yep that's right! You've just seen something that will replace your PC in the near future.



Here is how it works:

In the revolution of miniature computers, scientists have made great developments with Bluetooth technology.. . This is the forthcoming computers you can carry within your pockets.



This 'pen sort of instrument' produces both the monitor as well as the keyboard on any flat surfaces from where you can carry out functions you would normally do on your desktop computer.






Don't worry, the new laptop you bought can still be used for a couple of years!


Read More......